Instructions for use

Before you start

check_box

Consult the Safety Manual

Before using the PureBeam, please read the supplied safety manual carefully to familiarize yourself with the precautions for use.

check_box

Skin preparation

Shave the area to be treated: Use a clean razor to shave the area you wish to treat. Avoid waxing, as this removes hair at the root, which is counterproductive for pulsed light hair removal.

Clean and dry your skin: Make sure your skin is clean, dry and free from cosmetics, deodorants and other skin care products.

check_box

Skin test

Test a small area of skin to check reaction. Wait 24 hours. If no adverse reaction is observed, you can proceed.

Using Bloomy

check_box

Plug in the Device

Plug in your Bloomy and switch it on by pressing and holding the button on the back of the device.

check_box

Intensity setting

The Bloomy has 5 intensity levels. Start with the lowest level, especially if you have sensitive skin.

Gradually increase the intensity according to your comfort and your skin's reaction.

To select the intensity, simply press the green button on the back of the Bloomy once or several times.

check_box

Application

Place the device perpendicular to the area to be treated.

Press the button to trigger the light pulse.

Move the device to the next area, taking care not to treat the same area twice in the same session.

check_box

Session duration and frequency

Sessions should last according to the size of the area to be treated. A session for the legs can last around 15 minutes.

Repeat sessions every two weeks for the first two months, then once a month or as needed to maintain results.

After use

check_box

Switching off and unplugging the device

When the session is over, switch off the PureBeam and unplug it.

check_box

Skin Care

Apply a gentle moisturizer to soothe the skin.

Avoid sun exposure and use sunscreen on treated areas.